iTEMP TMT111
DIN rail temperature transmitter

©Endress+Hauser

Transformation of sensor signals into stable and standardized output signals for all industries

Unsurpassed reliability, accuracy and long-term stability in critical processes over all industries. The configurable transmitter not only transfers converted signals from resistance thermometers (RTD) and thermocouples (TC), it also transfers resistance and voltage signals. The standardized output signal is a 4 to 20 mA signal.
Swift and easy operation, visualization and maintenance by PC using operating software. Space-saving DIN rail mounting as per IEC 60715 (housing width: 12.6 mm)

  • 利点

    • Fault signal on sensor break or short circuit, presettable to NAMUR NE43

    • UL recognized component to UL 3111-1

    • CSA General Purpose

    • Meets the EMC requirements as per NAMUR NE21

    • Ex-Certification: ATEX Ex ia, CSA IS, FM IS

    • Galvanic isolation 2 kV (input/output)

    • ...

  • アプリケーション

    • PC programmable (PCP) DIN rail temperature transmitter for converting various input signals into a scalable 4 to 20 mA analog output signal

    • Usable for resistance thermometer (RTD), thermocouple (TC), resistance transmitter (Ω), voltage transmitter (mV)

    • ...

機能と仕様

戻る

Details

  • 測定原理

    レールトランスミッタ

  • 入力

    1 x RTD、TC、Ohm、mV

  • 出力

    1 x アナログ 4...20 mA

  • 補助電源

    DC 12~35 V(標準タイプ)

    DC 12~30 V(防爆タイプ)

  • 通信

    PCP(PCによるプログラム可能)

  • 取付

    DIN レール

  • 精度

    (Pt100、-50~+200 °C)<= 0.2 K

    (Pt100、-58~+392 °F)<= 0.4 °F

  • 電気的絶縁

  • 認証

    UL認証

    ATEX II2(1)G Ex ia IIC T4/T5/T6

    FM+CSA IS, NI I/1+2/ABCD

    FM IS, NI I/1+2/ABCD

    CSA IS, NI I/1+2/ABCD

ドキュメント/マニュアル/ソフトウェア

アクセサリ / スペアパーツ

Nr
Order code
Specification
    • Order code TXU10-

      設定キット TXU10-

      PCプログラム可能なデバイス用 セットアッププログラム + USBポート付きPCのインターフェース ケーブル

    • Order code

      The unit is not repairable