Flow assembly
Flowfit CPA250
Universal assembly for the water and wastewater industry
The Flowfit CPA250 flow assembly is designed for pipe installation in water and wastewater treatment. It offers space for three sensors and is able to extend their service life by keeping them wet even when the flow is interrupted. The assembly itself is also durable thanks to corrosion-resistant polypropylene. With Flowfit you get the right product exactly for your standard applications.
-
Standard products
- Reliable, robust and low-maintenance
Technical excellence
Simplicity
-
Specialized products
- Designed for demanding applications
Technical excellence
Simplicity
Variable
FLEX selections | Technical excellence | Simplicity |
---|---|---|
Fundamental selection Meet your basic measurement needs |
Technical excellence
|
Simplicity
|
Lean selection Handle your core processes easily |
Technical excellence
|
Simplicity
|
Extended selection Optimize your processes with innovative technologies |
Technical excellence
|
Simplicity
|
Xpert selection Master your most challenging applications |
Technical excellence
|
Simplicity
Variable |
-
Specs at a glance
-
Process temperature
max. 80°C (115°C)
-
Process pressure
max. 6bar(10bar)
-
Quick selection
Individual configuration
-
Benefits
Cost-efficient flow assembly for in-line installation
Simple installation and removal of the sensors thanks to threaded cap
Easy calibration without dismounting the sensors using the removable bottom part as calibration vessel
Reduces installation effort...
-
Field of application
Flowfit CPA250 is intended to be used in pipes in:
Wastewater treatment
Drinking water
Utilities
It is suitable for use with pressures of up to 6 bar.
Documents / Manuals / Software
-
Technical Information CPA250
Flow assembly for pH/ORP sensors
Technical Information (TI) -
Operating Instructions Flowfit W CPA250
Flow assembly for pH / ORP sensors
Operating Instruction (BA) -
Kompetenz in der Flüssigkeitsanalyse
Vom Sensor bis zur schlüsselfertigen Komplettlösung
Fields of Activities (FA)03/19German -
Expertise in liquid analysis
From sensors to complete turnkey solutions
Fields of Activities (FA)03/19English -
Esperti nell’analisi dei liquidi
Dai sensori singoli a soluzioni
complete “chiavi in mano”Fields of Activities (FA)01/17Italian -
Jistota v analýze kapalin
Od senzorů po kompletní dodávku na klíč
Fields of Activities (FA)01/17Czech -
Catálogo Portfolio Analítica
Desde sensores hasta soluciones completas
Fields of Activities (FA)01/17Spanish -
Conductivity measurement in industrial processes
Selection and engineering guide for different industries and
applicationsCompetence Brochure (CP)12/19English -
Leitfähigkeitsmessung in Industrieprozessen
Auswahl- und Engineeringhilfe für verschiedene Industrien und
AnwendungenCompetence Brochure (CP)12/19German -
pH 測定セレクションガイド
産業プロセスにおける pH 測定
Competence Brochure (CP)08/15Japanese -
CP00010C pH measurement in industrial processes for US market
Selection and engineering guide for your industry and application
Competence Brochure (CP)04/15English -
Measurement and control aspect of pH using inductively coupled with
bidirectional Memosens technology in flue gas desulfurization process
White Paper CP971C pH measurement and control in a power utility is an
integral part of process. The scrubber efficiency is highlydependent on
the pH. Numerous opportunities were revealed for saving time, as well as
the cost and materials in power plants. In afossil fuel power plant,
the
chemical energy stored in coal, oil, natural gas, shale oil, oxygen and
air
is converted into thermal, mechanical and finally into electrical
energy. In
other words, water is heated to steam, which spins a steam turbine. The
steam turbine drives an electrical generator.Competence Brochure (CP)04/11English -
pH-Messung in Industrieprozessen
Auswahl- und Engineering-Hilfe für verschiedene Industriebranchen und
ApplikationenCompetence Brochure (CP)03/20German -
pH measurement in industrial processes
Selection and engineering guide for different industries and
applicationsCompetence Brochure (CP)02/20English -
CP01202C pH Sensors:Calibrate, clean, perform a calibration check
or...?
This white paper will address
Knowing when to do a pH sensor calibration versus a calibration
check
How to properly clean a pH sensor
How to perform a pH sensor calibration
A decision tree for step by step guidanceCompetence Brochure (CP)02/12English -
Case study: Portable effluent treatment works
Mastering pH and flow control for a portable effluent treatment plant
Case Studies (CS)06/04English -
Flowfit W CPA250
Durchflussarmatur
Bis zu drei Elektrodeneinbauplätzen für pH-/Redox-Sensoren bzw. für den
Einbau in Rohrleitungen Bypass oder Online,Tender Text10/09German -
Flowfit W CPA250
Flow armature Up ro three electrode positions for pH-/Redox-sensors or
for installation in bypasses of pipelines or onlineTender Text04/09English -
FlowFit W
Product Code: CPA250-
Declaration Number: HE_01347_01.20
Manufacturer Specification: PEDManufacturer DeclarationGerman , English -
FlowFit W
Product Code: CPA250-
Declaration Number: HE_01116_01.19
Manufacturer Specification: RoHSManufacturer DeclarationGerman , English
Accessories / Spare parts
-
-
Nr 300 Order code 71290133
-
-
-
Nr 310 Order code 71290135
Kit CPA250: Protection cover w. star nut
-
-
-
Nr 320 Order code 71290137
-
-
-
Nr 380 Order code 71290139
-
-
-
Nr 330 Order code 71290140
Kit CPA250: Potential matching pin 316Ti
-
-
-
Nr 340 Order code 71290141
Kit CPA250: Potential matching pin titan
-
-
-
Nr 350 Order code 71290142
-
-
-
Nr 360 Order code 71290146
-
-
-
Nr 370 Order code 71290147
Kit CPA250: Tie rod with star nut
-
-
-
Nr 250 Order code 50009030
thrust ring
-
-
-
Nr 260 Order code 50014786
PG O-ring ID 10.69 W353 Viton
-
-
-
Order code 50003450
-
Order code 50003454
-
Order code 50003456
-
-
Predecessor