Picture of ultrasonic flowmeter Proline Prosonic Flow P 500 / 9P5B

Proline Prosonic Flow P 500 ultrasonic flowmeter

Clamp-on flowmeter for limited spaces in process industries with up to 3 I/Os

9P5B

Compare

Show all products: Flow Ultrasonic

Picture of ultrasonic flowmeter Proline Prosonic Flow P 500 / 9P5B - DN 80 to 4000 (3 to 156") — Proline Prosonic Flow P 500 – Ultrasonic clamp-on flow measurement for consistently high performance even in confined spaces

Picture of ultrasonic flowmeter Proline Prosonic Flow P 500 / 9P5B - DN 15 to 65 (½ to 2½") — Proline Prosonic Flow P 500 for pipes with line sizes DN 15 to 65 (½ to 2½")

Specs at a glance

Max. measurement error

Volume flow:
±3% o.r. for DN 15
±2% o.r. for DN 25 to DN 200
±2% o.r. above DN 200
Measuring range

0 to 15 m/s (0 to 50 ft/s)
Medium temperature range

DN 15 to 65 (½to 2½"): –40 to +150°C (–40 +302 °F)
DN 50 to 4000 (2 to 160"): –40 to +170°C (–40 to +338 °F)
Max. process pressure

N/A

See all specifications

Field of application

The proven sensor Prosonic Flow P can be installed close to elbows, expansions or constrictions in the pipe and still maintain the same measurement accuracy. Even measurement of abrasive, corrosive or toxic fluids is no problem for the non-invasive clamp-on device. Prosonic Flow P 500 is mounted without process interruption or opening the pipe. Heartbeat Technology not only ensures measurement reliability and compliant verification but also helps to find the optimal mounting position.

The measuring principle is non-invasive and independent of pressure, density and conductivity
Bidirectional measurement of various fluids, e.g. liquid hydrocarbons and chemicals

Device properties:

Mounting without process interruption
Wide nominal diameter range: DN 15 to 4000 (½ to 160")
Medium temperature: –40 to +170 °C (–40 to +338 °F)
Remote version with up to 3 I/Os
Backlit display with touch control and WLAN access
Standard cable between sensor and transmitter

Benefits

Constant accuracy even when mounted with short inlet run thanks to FlowDC
High safety standards – SIL by design, international hazardous area approvals
Long-term stable signal – maintenance-free permanent mounting from outside with coupling pads
Reliable measurement on various pipe materials – sensor for GRP and plastic pipes available
Full access to process and diagnostic information – numerous, freely combinable I/Os
Reduced complexity and variety – freely configurable I/O functionality
Integrated verification – Heartbeat Technology

Videos

Prosonic Flow P 500 with FlowDC function
The Ultrasonic Flow Measuring Principle

Extended selection

High-end products
Highly functional and convenient

Technical excellence

Simplicity

What is FLEX?

Simple products
Easy to select, install and operate

Technical excellence

Simplicity

What is FLEX?

Standard products
Reliable, robust and low-maintenance

Technical excellence

Simplicity

What is FLEX?

High-end products
Highly functional and convenient

Technical excellence

Simplicity

What is FLEX?

Specialized products
Designed for demanding applications

Technical excellence

Simplicity

Variable

What is FLEX?

FLEX selections	Technical excellence	Simplicity
F L E X Fundamental selection Meet your basic measurement needs	Technical excellence	Simplicity
F L E X Lean selection Handle your core processes easily	Technical excellence	Simplicity
F L E X Extended selection Optimize your processes with innovative technologies	Technical excellence	Simplicity
F L E X Xpert selection Master your most challenging applications	Technical excellence	Simplicity Variable

Learn more about the FLEX selections

Loading alternative products

Success stories

Singapore’s bunkering industry breaks new ground

Marine solutions provider Metcore International relies on Endress+Hauser’s innovative master meter solution
Read the full story
Highest accuracy for loading viscous bitumen

GRISARD BITUMEN AG relies on Promass Q 500's Multi-frequency Technology for reliably measuring bitumen with entrained gas
Read the full story
Reliable calibration using hydrocarbons

On the new factory calibration rig from Endress+Hauser, Wintershall Dea can now calibrate Promass F with hydrocarbons as legally mandated – a significantly cheaper option than on-site calibration.
Read the full story
Liquid analysis as part of surface treatment

Hug Oberflächentechnik AG relies on the portable Teqwave T from Endress+Hauser for the concentration measurement of their passivation and degreasing solutions
Read the full story
Smarter flowmeters for filling applications

Smarter flowmeters for filling applications: RONCHI MARIO have developed its new filler around the new generation of Endress+Hauser's Dosimag and Dosimass, with integrated batching functionality.
Read the full story

Could also interest you

Media
Innovation brochure - Proline Prosonic Flow P 500

For maximum performance in confined spaces thanks to brand-new FlowDC function
More information
Media
eBook – Proline Prosonic Flow P 500

For maximum performance in confined spaces thanks to the brand-new FlowDC function
More information

Liquids

Measuring principle

Ultrasonic flow
Product headline

Clamp-on flowmeter for limited spaces in process industries with up to 3 I/Os.
Constant accuracy even when mounted with short inlet run thanks to FlowDC.
Bidirectional measurement of various fluids, e.g. liquid hydrocarbons and chemicals.
Sensor features

High safety standards – SIL by design,
international hazardous area approvals. Long-term stable signal – maintenance-free
permanent mounting from outside with coupling pads. Reliable measurement on various pipe materials – sensor for GRP and plastic pipes available.
Mounting without process interruption. Wide nominal diameter range: DN 15 to 4000 (½ to 160"). Medium temperature: –40 to +170 °C (–40 to +338 °F).
Transmitter features

Full access to process and diagnostic information – numerous, freely combinable I/Os. Reduced complexity and variety –
freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Remote version with up to 3 I/Os. Backlit display with touch control and WLAN access. Standard cable between sensor and transmitter.
Nominal diameter range

Dual channel, 1 or 2 paths : DN 15 to 4000 (1/2 to 160")
Sensor materials

Clamp on system:
Sensor holder 1.4301/304, 1.4404/316L
Sensor housing 1.4301/304, 1.4404/316L
Strapping bands 1.4301/304, 1.4404/316L
Measured variables

Volume flow, sound velocity, flow velocity, totalizer
Max. measurement error

Volume flow:
±3% o.r. for DN 15
±2% o.r. for DN 25 to DN 200
±2% o.r. above DN 200
Measuring range

0 to 15 m/s (0 to 50 ft/s)
Max. process pressure

N/A
Medium temperature range

DN 15 to 65 (½to 2½"): –40 to +150°C (–40 +302 °F)
DN 50 to 4000 (2 to 160"): –40 to +170°C (–40 to +338 °F)
Ambient temperature range

–40 to +60 °C (–40 to +140 °F)
–50 to +60 °C (–58 to +140 °F) optional
Sensor housing material

N/A
Transmitter housing material

AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L
Degree of protection

Sensor remote version: IP68 type 6P
Transmitter remote version: IP66/67, Type 4X enclosure
Display/Operation

4-line backlit display with touch control(operation from outside)
Optional: WLAN
Configuration via local display and operating tools possible
Outputs

3 outputs:
4-20 mA HART (active/passive)
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output
Inputs

Status input
4-20 mA input
Digital communication

HART, Modbus RS485
Power supply

DC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)
Hazardous area approvals

ATEX, FM/CSA, UK Ex
Other approvals and certificates

Other approvals and certificates
Product safety

CE, C-tick
Functional safety

Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
Metrological approvals and certificates

Flowmeter verification for all frequencies except 0.3 MHz, reference line size: 5 MHz DN 50, all other frequencies DN 100
Verification performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a

Configure to download the CAD drawings of this product

Configure

Proline Prosonic Flow P 500 ultrasonic flowmeter

Clamp-on flowmeter for limited spaces in process industries with up to 3 I/Os

Specs at a glance

Max. measurement error

Measuring range

Medium temperature range

Max. process pressure

Field of application

Benefits

Videos

Extended selection

Success stories

Singapore’s bunkering industry breaks new ground

Highest accuracy for loading viscous bitumen

Reliable calibration using hydrocarbons

Liquid analysis as part of surface treatment

Smarter flowmeters for filling applications

Could also interest you

Innovation brochure - Proline Prosonic Flow P 500

eBook – Proline Prosonic Flow P 500

Measuring principle

Product headline

Sensor features

Transmitter features

Nominal diameter range

Sensor materials

Measured variables

Max. measurement error

Measuring range

Max. process pressure

Medium temperature range

Ambient temperature range

Sensor housing material

Transmitter housing material

Degree of protection

Display/Operation

Outputs

Inputs

Digital communication

Power supply

Hazardous area approvals

Other approvals and certificates

Product safety

Functional safety

Metrological approvals and certificates

Kit power supply, 100-230VAC, Ex

Kit power supply, 24VDC, Ex

Kit pow.supply,100-230VAC/24VDC, Non-haz

ISEM, Prosonic Flow P 500, nEx/Z2

Kit T-DAT, 100/300/400/500/500 digital

ISEM, Prosonic Flow P 500, Ex

Kit module cartridge, 300/500, Ex

I/O module, slot 1, 300/500

Kit module cartridge, 300/500, Non-haz

Kit ISEM ribbon cable, 300/500

I/O module, slot 2/3/4, 300/500

Kit conn.terminal option A,300/500,N-haz

Display module, 300/500/DKX001

Kit conn.terminal option C,300/500,N-haz

Kit conn.terminal option A, 300/500, Ex

Kit conn.terminal option C, 300/500, Ex

Kit cover, sight glass, Alu,Non-haz/Exde

Kit cover,glass, Alu, -50oC,Non-haz/Exde

Kit cover, sight glass, Alu, Exd

Kit cover, sight glass, Alu, -50oC, Exd

Kit cover, sight glass, cast, Ex

Kit cover, sight glass, cast, -50oC, Ex

Kit cover gasket, sight glass/blind

Kit cover gasket,sight glass/blind,-50oC

Kit cover, electr.compart., Alu, Non-haz

Kit cover,electronic, Alu,- 50oC,Non-haz

Kit cover gasket,electr.compart.,Non-haz

Kit cover gasket,electr., -50oC, Non-haz

Kit cover, electronic compart., Alu, Ex

Kit cover, electr.compart., Alu,-50oC,Ex

Kit cover, electronic compart., cast, Ex

Kit cover, electr.compart.,cast,-50oC,Ex

Kit cover gasket, electronic compart.,Ex

Kit cover gasket,elect.compart.,-50oC,Ex

Kit cover, wall mount, Alu, Ex

Memograph M RSG45
Advanced Data Manager

RMA42
Process transmitter with control unit

RB223
Loop powered passive barrier